One holder.
Every stamp you need.
A 3D-printed stamp holder with magnetic swap plates. Your logo, a seal, FRAGILE or PAID: just click the plate you need onto the same holder. The stamp face is flexible TPU on a foam cushion, so the print stays crisp even on cardboard.
Choose your shape and size
Round for seals and logos, square for symbols, rectangular for text. Each size has its own plates; within one size, every plate fits every holder.
Pro 10×10: our original E³ stamp
The largest size, and the stamp E³ StampSign started with. Big enough for a full logo, an address block or a quality seal. Swap plates work just like the other sizes: the carrier clicks on magnetically, no clips.
- Base
- PLA, 108 × 108 mm, with a separate glued-on handle
- Carrier
- 103 × 103 mm, 8 Ø6×3 magnets in the base and 8 in the carrier
- Plate
- 3 mm foam + TPU 95A, 102 × 102 mm, 1.5 mm relief
- 102 × 102 mm
Click, stamp, swap
Each stamp face sits on its own PLA carrier with magnets. A pin and a V-groove keep the print the right way up, every time. You order one holder and as many plates as you like, now or later.
PLA in 7 colours, with a knob, a faceted grip or no handle.
Ø6×3 mm neodymium, glued into both holder and plate.
Carrier + 3 mm foam + TPU face with 1.5 mm relief.
On cardboard, paper or kraft, with an ink pad in your colour.
Three ways to hold it
Already made in our workshop
Click an example to open it in the configurator. You can still change the text, symbol and frame afterwards.
What does a stamp cost?
Faceted grip +€5.00 · own logo +€7.50 per plate (check and vectorisation) · prices incl. VAT · shipping €8, free from €99, or collect from our workshop.
Something else in mind?
A different shape or size, a large run or a stamp for a special job: we'll happily put together a custom quote.
Frequently asked questions
Does every plate fit every holder?
Every holder of the same shape and size. A plate for round Ø40 fits any round Ø40 holder, whatever its colour or handle.
How small can text be?
Capitals need to be at least 2.6 mm high, calligraphy at least 5 mm. Lines are at least 0.8 mm wide. The configurator warns you if your design drops below that.
Which ink should I use?
Any water-based ink for stamp pads works. We supply pads with black, red, blue, green or violet ink. For cardboard we recommend black or red.
Can I order extra plates later?
Yes. Choose the same shape and size in the configurator, set the number of extra plates you need and mention in your order that you already have the holder. We will deduct the holder.
How do I send my logo?
Upload a PNG or JPG in the configurator. Got an SVG or PDF? Email it to hello@embody3.com after ordering. We turn your logo into a crisp relief and send you a digital proof before we print.
Your own stamp, designed in five minutes.
Live preview of your print, on kraft or white paper.
Design your E³ StampSign
Choose a holder, design your stamp plate and add extra plates. Every plate clicks magnetically onto the same holder.
✓ incl. magnets, foam cushion and TPU stamp face
Delivered in 5–7 working days · shipping €8, free from €99 · or collect
Click a plate to edit it. Extra plates are made for this holder and click onto it magnetically.
Already made in our workshop
Click an example to load it into the configurator as a starting point. You can change everything afterwards.
Custom stamp: request a quote
Tell us what you're looking for. We'll look at it personally and send you a quote within 2 working days. No obligation, nothing to pay now.
Thank you, your request has been sent.
You'll receive a confirmation email shortly. We'll send you a quote within 2 working days.